Panasonic KX-TC1871CB Operating Instructions Manual page 92

" Before Requesting Help
Problem
You cannot program items,
such as the dialing mode.
Previously programmed
information is erased.
"Recharge battery" is
displayed, "
the unit beeps intermittently.
You charged the battery
fully, but "Recharge
battery" is still displayed
and/or " " continues to
flash.
The IN USE/CHARGE
indicator light does not go
out while charging.
92
Cause and Remedy
≥Programming is not possible while the
unit is in the talk or speakerphone
mode, when viewing the Caller
List/directory list, or while the answering
system is in use.
≥Do not pause for over 60 seconds while
programming.
≥Move closer to the base unit.
(›) (‹)
,
≥
may have been pressed when you
picked up the handset. Press
(FUNCTION/EXIT/CH)
≥If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.
≥Charge the battery fully (p. 15).
" flashes or
≥Clean the charge contacts and charge
again (p. 16).
≥Install a new battery (p. 87).
≥This is normal.
BACK (fi) FWD/EDIT (fl)
, or
and try again.