Selecting The Number Of Rings - Panasonic KX-TC1871CB Operating Instructions Manual

Selecting the Number of Rings

You can select the number of times the unit rings before the answering
system answers a call, from "2" to "7" or "Toll saver"*.
Your phone comes from the factory set to "Toll saver".
(FUNCTION/EXIT/CH)
1 Press
(›) (‹)
2 Press or
points to "Program".
FWD/EDIT (fl)
3 Press
(›) (‹)
4 Press or
points to "TAD program".
FWD/EDIT (fl)
5
Press
≥The base unit display shows the answering
system function menu.
(2)
6 Press .
≥The current setting is displayed on the base
unit.
(0) (2)
7 Press , or to
0: Selects "Toll saver".
2–7: The unit will answer after the selected number of rings.
FWD/EDIT (fl)
8
Press
≥A beep sounds.
≥To return to the standby mode, press (FUNCTION/EXIT/CH).
*Toll saver
When you call the unit from a touch tone telephone:
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 4th ring, there are no new messages.
Hang up when you hear the 3rd ring. This will save you the toll
charge for the call.
.
repeatedly until the arrow
(Yes key).
repeatedly until the arrow
(Yes key).
(7)
to set the number of rings.
(Save key).
1Save directory
Calling pager
1=Yes
4 3
Ringer volume
1Program
1=Yes
4 3
1Save DIRECT#
Set flash time
1=Yes
4 3
Talk switching
1TAD program
1=Yes
4 3
Answering
system setting.
See base unit.
Base unit display
Number of rings
:Toll saver
29