Table of Contents
Advertisement
Storing a 1-800 or 1-888 pager number
If you use a 1-800 or 1-888 pager number with a PIN code, store the
pager number as follows.
1
Repeat steps 1 through 6 on page 70.
1 Enter the 1-800 or 1-888 pager number, and press
2
(REDIAL/PAUSE)
2 Enter the PIN code, and press
≥The entered number is displayed on the base unit.
≥If you misdial, press (INTERCOM/CLEAR) and enter the correct number.
≥You can enter a total of 44 digits.
FWD/EDIT (fl)
3
Press
≥A beep sounds.
≥To return to the standby mode, press (FUNCTION/EXIT/CH).
* Pager companies require a delay after the pager number and the
PIN code are dialed. Contact your pager company regarding the
required pause time. Pressing
3.5 second delay and counts as one digit.
≥If the line has rotary or pulse service, press (TONE) between the pager number
and (REDIAL/PAUSE) in step 2.
≥Alphanumeric voice dispatch pager services will not work with this function.
3 times.*
(REDIAL/PAUSE)
(Save key).
(REDIAL/PAUSE)
"
twice.*
once creates a
71
Advertisement
Table of Contents
