Flash Button - Panasonic KX-TC1871CB Operating Instructions Manual

FLASH Button

(FLASH/CALL\WAIT/PLAYBACK)
Pressing
you to use special features of your host PBX such as transferring an
extension call or accessing special telephone services (optional) such as
call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: "700, 600, 400, 300, 250, 110,
100 or 90 ms (milliseconds)". Your phone comes from the factory set to
"700 ms".
Make sure the unit is in the standby mode.
(FUNCTION/EXIT/CH)
1 Press
(›) (‹)
2
Press or
points to "Program".
FWD/EDIT (fl)
3 Press
(›) (‹)
4 Press or
points to "Set flash time".
FWD/EDIT (fl)
5
Press
(›) (‹)
6 Press or
desired time is displayed.
FWD/EDIT (fl)
7 Press
≥A beep sounds.
≥To return to the standby mode, press (FUNCTION/EXIT/CH).
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
≥If you are connected via a PBX, a longer flash time may be necessary to use
PBX functions (transferring a call etc.). Consult your PBX supplier for the correct
setting.
or
.
repeatedly until the arrow
(Yes key).
repeatedly until the arrow
(Yes key).
repeatedly until the
(Save key).
(FLASH/CALL\WAIT)
allows
Ringer volume
1Program
4 3
Save DIRECT#
1Set flash time
4 3
Flash time
:700ms
1=Save
4 3
1=Yes
1=Yes
63