Approved Kombiengines; Assembling The Unit - Stihl BF-KM Instruction Manual

English

Approved KombiEngines

KombiEngines
Only KombiEngines supplied by STIHL
or expressly approved by STIHL for use
with the specific model are authorized.
Only use this KombiTool with the
following KombiEngines:
STIHL KM 55 R, KM 56 R, KM 85 R,
KM 90 R, KM 94 R, KM 110 R,
KM 130 R
WARNING
For machines with a loop handle, the clip
(barrier bar) must be installed.
10

Assembling the Unit

Pull the protective caps off the ends
N
of the drive tube and keep them in a
safe place for later use – see
"Storing the Machine".
NOTICE
The plug may come out of the drive tube
when you pull off the cap. Push it back
into the drive tube as far as stop.
Mounting the deflector
Slide the deflector (1) onto the drive
N
tube (2) until distance "a" is 4 in
(100 mm).
Line up the deflector (1) so that it is
N
vertical and the fixing lug (arrow) on
the drive tube points up.
Tighten the clamp screw (3)
N
moderately.
NOTICE
Check that the deflector is secure – it
must not be possible to rotate it on the
drive tube.
BF-KM