Stihl BF-KM Instruction Manual
  1. Manuals
  2. Brands
  3. Stihl Manuals
  4. Tiller
  5. BF-KM
  6. Instruction manual

Stihl BF-KM Instruction Manual

Hide thumbs Also See for BF-KM:
Table of Contents

Advertisement

Quick Links

Download this manual
BF-KM
2 - 14
Instruction Manual

Advertisement

Table of Contents
loading

Related Manuals for Stihl BF-KM

Summary of Contents for Stihl BF-KM

  • Page 1 BF-KM 2 - 14 Instruction Manual...

  • Page 2: Table Of Contents

    UKCA Declaration of Conformity....14 ual. KombiSystem Safety Precautions and In the STIHL KombiSystem a number of different Working Techniques KombiEngines and KombiTools can be com‐ bined to produce a power tool. In this instruction Special safety precautions must be observed when working with the culti‐...
  • Page 3 3 Safety Precautions and Working Techniques English STIHL recommends the use of original STIHL Do not touch hot parts of the machine – risk of replacement parts, rotor blades and accessories. burn injury! They are specifically designed to match the prod‐...
  • Page 4 English 3 Safety Precautions and Working Techniques Right hand on control handle, left hand on grip on handlebar. 3.4.2 For versions with loop handle Arrows on the rotor blades show the direction of rotation. The arrows on the rotor blades must point in the same direction as the arrows on the gear.
  • Page 5 – there is STIHL recommends that you have servicing and otherwise a risk of injury! repair work carried out exclusively by an author‐ Opening the throttle while the rotor blades are ized STIHL servicing dealer.

  • Page 6: Using The Unit

    English 4 Using the Unit Using the Unit WARNUNG General Information The cultivator moves away from the user during work. Always ensure a secure footing to be able to control the cultivator. Example applications ► Breaking up soil A few preparations are necessary before you begin to break up soil which has been previously tilled (e.g.

  • Page 7: Approved Kombiengines

    NOTICE nation with the following KombiEngines: STIHL KM 55 R, KM 56 R, KM 85 R, KM 90, The plug may come out of the drive tube when KM 90 R, KM 94 R, KM 100, KM 100 R, KM 110, you pull off the cap.
  • Page 8 English 6 Assembling the Unit ► Slide the deflector (1) onto the drive tube (2) NOTICE until distance (a) is 100 mm ► Line up the deflector (1) so that it is vertical It must not be possible to rotate the gearbox on and the fixing lug (arrow) on the drive tube the drive tube.

  • Page 9: Mounting The Kombitool

    7 Mounting the KombiTool English Shoulder Strap The hub of the inner rotor blade is larger than that of the outer blade. ► rotate the outer right-hand rotor blade (8) on the shaft until it can be pushed into position – check the direction of rotation again - arrows ►...

  • Page 10: Starting / Stopping The Engine

    English 9 Starting / Stopping the Engine Throwing Off the Machine ► Adjust the length of the strap so that the cara‐ biner (2) is about a hand’s width below your right hip. WARNING Attaching Machine to Harness The machine must be quickly thrown off in the event of imminent danger.

  • Page 11: Storing The Machine

    ► Store the machine in a dry and secure loca‐ STIHL recommends that you have servicing and tion. Keep out of the reach of children and repair work carried out exclusively by an author‐...

  • Page 12: Main Parts

    Noise and vibration data measurements on power tools with the BF‑KM KombiTool include idling and rated maximum speed in a ratio of 1:6. For further details on compliance with Vibration Directive 2002/44/EC, see www.stihl.com/vib 14.4.1 Sound pressure level L in accord‐ ance with ISO 11201...

  • Page 13: Maintenance And Repairs

    When repairing the machine, only use replace‐ KM 55 R with loop 6.9 m/s 8.0 m/s ment parts which have been approved by STIHL handle: KM 56 R with loop for this power tool or are technically identical. 5.5 m/s 7.4 m/s...

  • Page 14: Ukca Declaration Of Conformity

    Technical documents deposited at: EN ISO 12100 (in conjunction with the listed KM‑ ANDREAS STIHL AG & Co. KG and FR‑ tools) The year of manufacture is stated on the power EN ISO 12100, EN 60335-1, EN 50636-2-92 (in tool.
  • Page 15 18 UKCA Declaration of Conformity English 0458-478-0121-D...
  • Page 16 *04584780121D* 0458-478-0121-D...

Table of Contents