Close The Washer Door And Press The Start Button; Once The Program Has Finished - Asko W6864W Operating Instructions Manual

Washing
7
Close the washer door and
press the Start button
NOTE!
A few seconds after you start a program the
washing machine will begin to fill with water from
both the hot and the cold supplies. If for some
reason no hot water is available, the machine
waits for one minute and then fills with cold
water only. The wash drum does not start to
rotate until it begins to fill with water.
Time remaining
The time remaining is shown in hours and
minutes. Once a program is selected, the
estimated program time is displayed. This
may differ from time to time depending on the
temperature of the water entering the machine
and the size of the load. If the program time is
longer than the previous wash with the same
program, "0:01" will be displayed until the
program finishes. This is normal! The next time
you use the program under similar conditions,
the estimated program time will be more
accurate.
Stopping or changing a programme
You can stop a programme by pressing the Stop
button for three seconds. "Stop" appears in the
display. To restart the machine, select a new
programme, add any extra detergent needed and
press the Start button.
NOTE!
Do not open the detergent compartment while
the machine is running.
8
Once the program has
finished
The text "Done" is shown on the display
for 2 minutes. The machine then turns off.
The washer door opens automatically once the
program has finished. If you want to deactivate
the automatic door opening function, see the
"Selecting settings" section.
Remove the load.
If you have small children or pets at home, close
the washer door once you have removed the
laundry.
NOTE!
Upon completion of the washing cycle, close the
water faucet and unplug the mains cord.
17