Table of Contents
Advertisement
Washing
Close the washer door and
6
press the Start button
NOTE!
A few seconds after you start a programme the
washing machine will begin to fi ll with water from
both the hot and the cold supplies. If for some
reason no hot water is available, the machine
waits for one minute and then fi lls with cold
water only. The wash drum does not start to
rotate until it begins to fi ll with water.
The hot water inlet is only open for washing
programs with water temperature of 40 °C or
higher.
During the programme
Time remaining
"Programme started" is shown on the display.
Stopping or changing a programme
You can stop a programme by pressing the Stop
button for three seconds. "Stop" appears in the
display. To restart the machine, select a new
programme, add any extra detergent needed
and press the Start button.
NOTE!
Do not open the detergent compartment while
the machine is running.
Once the program has fi nished
7
The text "Done" is shown on the display
for 10 minutes. The machine then turns
off .
Once the program is fi nished, the washer door
will automatically unlock.
• Open the door and remove the laundry.
If you have small children or pets at home, close
the washer door once you have removed the
laundry.
NOTE!
Upon completion of the washing cycle, close the
water faucet and unplug the mains cord.
17
Advertisement
Table of Contents
