Scsi Bus Termination - LSI LSI20860 User Manual

1.3.3 SCSI Bus Termination

1-10
Step 2. Plug the 50-pin connector on the other end of the SCSI cable
into the SCSI connector on the peripheral device. This
connection is shown in
Step 3. To connect more than one device to the LSI20860, use shielded
cables to chain them together as illustrated in
Figure 1.4 Multiple External Devices Chained Together
All SCSI devices have a set of resistors called terminators to assure
reliable operation of the SCSI bus. The devices making up the SCSI bus
Using the LSI20860
Figure 1.4.
Figure 1.4.