Transfer Custom Maps And Gps Data Files; Custom Maps; Gps Data Files - Lowrance iFINDER H2O C Operation Instructions Manual

WARNING:
Clearing a trail will erase the trail from the iFINDER's memory.
You will not be able to backtrack the trail, if the it is erased. If you
need to preserve the trail, switch to Advanced Mode and use the in-
structions in Sec. 4 for Creating and Saving a Trail.
1. Press
MENU
Press ← |
ENT

Transfer Custom Maps and GPS Data Files

Custom Maps:

Custom maps work only from the MMC card or SD card. When a card
containing a Custom Map File is loaded into the unit, the iFINDER
automatically loads the map into memory when the unit is turned on.
Instructions for copying Custom Map Files to an MMC are contained in
the instruction manual for your MMC card reader and MapCreate 6
software. For instructions on inserting an MMC into the iFINDER, see
Sec. 2, Installation/Accessories.

GPS Data Files:

GPS Data files contain waypoints, routes, trails and event marker
icons. Instructions for copying GPS Data Files between your computer
and an MMC are contained in the instruction manual for your MMC
card reader and MapCreate 6 software.
GPS data automatically recorded in the unit's internal memory must be
saved to the MMC (as a GPS Data File) in order to store it on your per-
sonal computer. GPS Data Files stored on an MMC must be copied from
the card to the iFINDER's internal memory before the unit can read
them. Here's how:
1. Insert the MMC into your unit. Press
| and the screen below appears.
D ENT
ATA
|↓ to
C T
LEAR RAIL
. 2. Press
EXIT| EXIT
| . The iFINDER asks if you're sure.
ENT
to get back to the main page display.
38
|↓ to
MENU T M
RANSFER Y