Power/Lights On And Off; Main Menu - Lowrance iFINDER H2O C Operation Instructions Manual

Power/lights on and off

To turn on the unit, press . To turn on the backlight, press
PWR PWR
again. Pressing once again will turn off the backlight. (Press
PWR EXIT
to clear any message or alarm displays.)
Turn off the unit by pressing and holding the key for 3 seconds.
PWR

Main Menu

Advanced Mode has a single Main Menu, which contains some function
commands and some setup option commands. The instructions in this
section will deal only with functions, the basic commands that make
the iFINDER do something. The iFINDER will work fine for these in-
structions right out of the box with the factory default settings. But, if
you want to learn about the various options, see Sec. 5, System Setup
and GPS Setup Options.
1. To get to the main menu from any page: press | . To clear
MENU MENU
the menu screen and return to the page display, press .
EXIT
Main Menu, Advanced Mode.
The Main Menu commands and their functions are:
Screen: changes the contrast or brightness of the display screen and
backlight delay.
Sounds: enables or disables the sounds for key strokes and alarms and
sets the alarm style.
Transparency: adjusts the level of transparency for menus.
Alarms: changes alarm thresholds and allows users to turn on or off
GPS alarms.
Route Planning: allows you to plan, view or navigate routes.
My Trails command: used to show, create, edit or delete trails.
Cancel Navigation: turns off the navigation command after you have
reached your destination.
42