Waypoints; Create A Waypoint; Create Waypoint On Map; Create Waypoint At Current Position - Lowrance iFINDER H2O C Operation Instructions Manual

Waypoints

A waypoint is an electronic address, based on the latitude and longi-
tude of a position on the earth. It represents a location, spot, or destina-
tion that can be stored in memory, then recalled and used later for
navigation purposes. You can create a waypoint at the cursor position
on the map or at your current position while you are navigating.

Create a Waypoint

These techniques use the Quick Save method, the fastest and easiest
way to create a waypoint.

Create Waypoint on Map

1. Use the arrow keys to move the cursor to a place where you want to
make a waypoint.
2. Press | . The waypoint is saved and automatically given a
ENT ENT
name with a sequential number, like waypoint 001. The waypoint sym-
bol and number appear on the map.

Create Waypoint at Current Position

1. While you are traveling, press | . The waypoint is saved and
ENT ENT
automatically given a name with a sequential number, like waypoint
002. The waypoint symbol and number appear on the map.

Create a Man Overboard Waypoint

This unit has a man overboard feature that shows navigation data to
the location where the feature was activated. To activate it, press the
and keys at the same time. Your position at the time these
ZOUT ZIN
keys are pressed is used as the man overboard position. The unit auto-
matically begins navigating to the MOB waypoint. For more details, see
the Man Overboard entry in the Easy Mode Operation section.

Create a Waypoint by Average Position

This feature sets a waypoint at the current position after taking several
position readings and averaging them. It boosts waypoint position accu-
racy by helping to eliminate errors caused by atmospheric conditions
and other factors.
1. Press |↓ to | ( is highlighted)| .
ENT A P ENT C ENT
VERAGE OSITION REATE
2. Wait while the unit takes points to average for the position. (The greater
the number of points, the greater the accuracy.) When the desired number
of points accumulates, press to create and save a waypoint.
ENT
3. The Waypoint information window appear. Go To will be highlighted
at the bottom of the window. But, if you want to edit the waypoint
name, use the ← → keys to bring up
and press . When you
E N ENT
DIT AME
are satisfied with the entry, press | to save the waypoint.
EXIT EXIT
61