Lowrance iFINDER H2O C Operation Instructions Manual page 114

1. Press |↓ to | and the Find Streets menu ap-
FIND F S ENT
IND TREETS
pears.
2. Enter a street name in the First Street dialog box, then press to
ENT
display the Find By Name menu. There are two options: A. You can
spell out the street in the top selection box. Press ↑ or ↓ to change the
first letter, then press → to move the cursor to the next letter and repeat
until the name is correct, then press | . B. Jump down to the
ENT ENT
, then press ↓ or ↑ to select a street
lower selection list by pressing
ENT
from the list, then press .
ENT
3. The street you're searching for appears in the First Street box.
4. Now fill in the second street. Press ↓ to
| and the
S S ENT
ECOND TREET
Find by Name menu appears again. Just like before, there are two op-
tions: A. You can spell out the street in the top selection box. Press ↑ or
↓ to change the first letter, then press → to move the cursor to the next
letter and repeat until the name is correct, then press | . B. Jump
ENT ENT
, then press ↓ or ↑ to se-
down to the lower selection list by pressing
ENT
lect the second street from the list, then press .
ENT
5. The Find Streets menu reappears with the first and second streets
dialog boxes filled in. In this example we selected Sheridan as our second
street. You could now use similar techniques to select a city or Zip Code,
but your search will probably be faster if you leave those boxes blank.
You can specify a city and/or Zip Code later to narrow the search, if the
resulting list is too long.
Find intersection selected (left); Working message (center);
Intersection list (right).
6. To search for the intersection of the two streets, press ↓ to
F
IND
| . A message appears asking you to wait while the unit
I ENT
NTERSECTION
finds the intersection. When the Intersections list appears, press ↑ or ↓
to select the intersection you are searching for and press . (In the
ENT
previous example, we selected the intersection of E 81st St and
Sheridan in Tulsa, Okla.
106