Clearing Or Erasing A Trail; Transfer Custom Maps And Gps Data Files; Custom Maps - Lowrance iFINDER Hunt Operation Instructions Manual

Track or compass heading indicator
Trail
waypoint
symbol
Trail line
Navigate trail, navigation page (compass rose) views: Driver is east-
bound heading straight toward trail point 5 (left); bearing arrow
shows the trail point is due east (straight ahead.) Driver has reached
trail point 5 (right) and must turn south to follow the trail. Arrival
alarm goes off and bearing arrow swings around to say turn right
(south), toward the next waypoint, trail point 6. iFINDER now shows
navigation information to point 6, which is 2.07 miles away.
3. When you reach your destination, be sure to cancel your navigation:
press |↓ to
MENU
if you want to cancel navigation. Select

Clearing or Erasing a Trail

You can erase the current trail and automatically begin recording a
new one by using the Clear Trail command.
WARNING:
Clearing a trail will erase the trail from the iFINDER's memory.
You will not be able to backtrack to that trail if it is erased. If you
need to preserve the trail, switch to Advanced Mode and use the in-
structions in Sec. 4 for Creating and Saving a Trail.
1. Press
MENU
want to Clear all trail points. Select
2. Return to the page by pressing

Transfer Custom Maps and GPS Data Files

Custom Maps:

Custom maps work only from the MMC card or SD card. When a card
containing a Custom Map File is loaded into the unit, the iFINDER
automatically loads the map into memory when the unit is turned on.
C N
ANCEL AVIGATION
|↓ to
C T
LEAR RAIL
Present position
Compass
rose
Cross track
error range
(off course
indicator)
| . A message will appear asking
ENT
and press
Y
ES
| . A message appears asking if you
ENT
and press
Y
ES
.
EXIT
39
.
ENT
.
ENT
Bearing
arrow