Clearing Or Erasing A Trail - Lowrance iFINDER H2O C Operation Instructions Manual

Back trail
dotted line
Trail point
Navigate trail, map views: Driver is southbound heading straight to-
ward trail point 6 (left). The steer arrow tells the driver to go straight.
Southbound driver (right) has reached point 6 and must turn east to
follow trail. The steer arrow swings around to the left (east), toward
the next trail waypoint (arrival alarm message turned off for clarity.)
Track or compass heading indicator
Trail
waypoint
symbol
Trail line
Navigate trail, navigation page (compass rose) views: Driver is east-
bound heading straight toward trail point 5 (left). The bearing arrow
shows the trail point is due east (straight ahead.) Driver (right) has
reached trail point 5 and must turn south to follow the trail. Arrival
alarm goes off and bearing arrow swings around to right (south), to-
ward the next waypoint, trail point 6. The iFINDER now shows naviga-
tion information to point 6, which is 2.07 miles away.
3. When you reach your destination, be sure to cancel your navigation:
press |↓ to
MENU
sure. Press ← |

Clearing or Erasing a Trail

You can erase the current trail and automatically begin recording a
new one by using the Clear Trail command.
C N
ANCEL AVIGATION
.
ENT
North
Present
position
arrow
Present position
Compass
rose
Cross track
error range
(off course
indicator)
| . The iFINDER asks if you're
ENT
37
Steer arrow
Bearing
arrow