TP-Link M7350 User Manual page 53

2) If it is, click Correct and set Total Used to zero. You can also turn off the Data Limit to
access the Internet again.
FAQ3. How do I restore factory default settings?
Tip 1: On your PC, log into the web-management page, go to "Advanced->Device->Factory
Defaults", and click Restore.
Tip 2: Press and hold the Reset button for about 5 seconds until the screen appears "Power
Off".

Note:
Once the M7350 is restored, all the current configurations will be lost and you may need to
reconfigure it.
FAQ4. What should I do if my Internet speed is slow?
Tip 1: The 4G network may be in poor condition. Press the MENU button to scroll to Network
Mode, press the
Tip 2: The 2.4GHz Wi-Fi network may be interfered. Recommend using the 5GHz Wi-Fi network
if your devices support it. Press the MENU button to scroll to WiFi 2.4G/5G, press the
button and choose the 5GHz Wi-Fi band.
FAQ5. How to share 3G/4G connection via USB?
This function (also called as RNDIS) is plug and play in windows Vista, windows 7 and windows
8. But in windows XP, you will need to install the driver manually.
For windows XP:
Step 1: After you have connected your M7350 to a windows XP computer via USB, there will be
a popup window like this. Choose "no, not this time" and click next.
Step 2: Choose "Install from a list or specific location (Advanced)" and click next.
M7350
button and try another mode.
-43-
LTE-Advanced Mobile WiFi User Guide