TP-Link M7350 User Manual page 32

APN: Access Point Name, provided by your ISP. You need to set APN only after selecting

the static APN type. You are recommended to keep the default value.
Username/Password: Enter the username and password provided by your ISP. These

fields are case-sensitive. You are recommended to keep the default value.
Authentication Type: Some ISPs need a specific authentication type, please confirm it

with your ISP or keep the default value.
None: No any authentication is needed.

PAP: Password Authentication Protocol. This protocol allows the device to establish

authentication with the peer using two handshakes. Select this option if the ISP
requires this authentication type.
CHAP: Challenge Handshake Authentication Protocol. This protocol allows the device

to establish authentication with the peer using three handshakes and checking the
peer identity periodically. Select this option if the ISP requires this authentication type.
Click Create to create a new profile.
Click Save to save your settings.
4.4.1.2. Network Mode
You can configure Network Mode on this page.
M7350 LTE-Advanced Mobile WiFi User Guide
New Profile
Figure 4-13
-22-