Radio And Ip Address Configuration - Cisco 1240AG Series Quick Start Manual

Status LED
Blue
Light green
Amber or red

Radio and IP Address Configuration

The access point ships with its radio disabled and no assigned IP address or
service set identifier (SSID). You must enable them when you configure the
access point for the first time. The access point no longer is assigned an IP
address. It is configured to obtain an IP address by using a DHCP server. If
your network does not use a DHCP server, you must connect to the access
point console port and assign a static IP address (See the
Address Using the CLI" section on page
2
Status Description
Normal operating condition and at
least one wireless client device is
associated with the access point.
Normal operating condition, but no
wireless client devices are
associated with the access point.
Error condition. See the
the Access Point LEDs" section on
page 42.
20.
"Checking
"Assigning an IP
OL-16714-01