Cisco 1240AG Series Quick Start Manual page 5

Warning
Read the installation instructions before you connect the
system to its power source. Statement 1004
Warning
This product must be connected to a power-over-ethernet
(PoE) IEEE 802.3af compliant power source or an IEC60950
compliant limited power source. Statement 353
Warning
This product relies on the building's installation for
short-circuit (overcurrent) protection. Ensure that the
protective device is rated not greater than:
20A Statement 1005
Warning
Do not operate your wireless network device near unshielded
blasting caps or in an explosive environment unless the
device has been modified to be especially qualified for such
use. Statement 245B
Quick Start Guide Cisco Aironet 1240AG Series Access Point
5