Visual Trailing; Navigate A Trail (Forward) - Lowrance GlobalMap 4000M Operation Instructions Manual

The other two methods provide a full range of navigation data and work
with both the Map Page and Navigation Page. The only difference be-
tween them is "navigating a trail" follows a trail forward (from start to
end) while "backtracking" follows a trail in reverse (from end to start.)
When hiking at walking speed with a hand-held GPS, we often just use
visual back trailing because it is a bit better at following each little
turn on a foot path. At faster speeds, such as the highway or on the wa-
ter, the Navigate Trail and Backtrack Trail commands are handy.

Visual Trailing

1. On the Map Page, zoom (
2. Begin moving and watch the Map Page. Simply walk or steer so that
your current position arrow traces along the trail you have just made.
Tip:
Generally, when using this method, the smaller the zoom range, the
more accurately you will be able to steer along the trail.

Navigate a Trail (forward)

The following figures illustrate the menu sequence for navigating a
trail.
1. Press
MENU
2. Press ↓|↓ to enter the Saved Trail list, then use ↑ or ↓ to select the
desired Trail Name|
3. Press → to
4. Press ↓ to
mation along the trail.
NOTE:
If you are already located at or near the beginning of your trail, the
arrival alarm will go off as soon as you hit Enter. Just press
clear the alarm and proceed.
5. Now, begin moving and follow your GlobalMap 4000M.
6. When you reach your destination, be sure to cancel your navigation:
press |
MENU MENU
asks if you're sure; press ←|
| |↓ to
MENU M
.
ENT
|↓ to
D T
ELETE RAIL
| . The unit begins showing navigation infor-
N ENT
AVIGATE
|↓ to
C
ANCEL
or ) so your flashing trail is visible.
ZIN ZOUT
| .
T ENT
Y RAILS
|
N ENT
AVIGATE
N
AVIGATION
.
ENT
46
.
| . The GlobalMap 4000M
ENT
to
EXIT