Addendum: Overlay Data - Lowrance GlobalMap 4000M Operation Instructions Manual

Overlay Data
To change the digital data shown on top of the Map Page:
To select data for display:
1. From the Map page, press
2. Press ↓ or ↑ to select Data Type|
Overlay Data command on the Map Menu, at left. Overlay Data Shown
selection menu, right. In this example, we scrolled down the data list
to highlight "Distance." Ground Speed and the Steering Arrow are
already selected, as shown by the check marks beside their names.
When selected, the data type shifts to the top of the data list and a
check mark appears beside the data type. (If you wish, you may now
use ↓ or ↑ to select other Data Types for display.)
3. To return to the previous page, press
To turn off displayed data:
1. From the Map, press
2. Press ↓ or ↑ to select Data Type|
disappears from the top of the list and reverts to its previous,
unchecked position. (If you wish, you may now use ↓ or ↑ to select other
Data Types to turn off.)
3. To return to the previous page, press
To change displayed data font size:
1. From the Map page, press
2. Press ↓ or ↑ to select Data Type|press → or ← to
The selected data type will be displayed in the new size. (To change the
font size for another Data Type, press
beginning with step two above.)
3. To return to the previous page, press
|↓ to
MENU
ENT
|↓ to
MENU O
VERLAY
|↓ to
MENU
115
O D
VERLAY ATA
.
| .
EXIT EXIT
|
D ENT
ATA
. The selected data type
ENT
| .
EXIT EXIT
O D
VERLAY ATA
Data Size
and repeat these steps,
ENT
.
EXIT
| .
ENT
.
| .
ENT
| .
EXIT