Navigate A Route; Navigate A Route In Reverse - Lowrance GlobalMap 4000M Operation Instructions Manual

3. Use ↓ and ↑ to select a command from the Edit Route Waypoints
menu and press
route by clicking on a map location with the cursor. Add Waypoint calls
up the Waypoint List so you can insert a waypoint from the list. Re-
move Waypoint will delete the waypoint from the route. View Waypoint
will show you where the selected waypoint is on the map.

Navigate a Route

1. From the
N
press |
MENU MENU
Route Planning command on Main Menu, left; Routes menu, center;
Edit Route menu, right. Navigate command is selected.
2. Press ↓ to select route name|
3. Upon arrival at your destination, cancel navigation:
press |
MENU MENU
The following figures show what the Navigation Page and Map Page
look like while navigating a route.

Navigate a Route in Reverse

Here's how you run a route backward, from the end waypoint to the
beginning waypoint:
Edit Route Waypoints menu.
. Add From Map lets you insert a waypoint in the
ENT
, press
P
AVIGATION AGE
|↓ to
R
OUTE
|↓ to
C
ANCEL
|
MENU ENT
| .
P ENT
LANNING
|↓ to
ENT N
AVIGATE
|
N ENT
AVIGATION
59
or from the
| | .
ENT ENT
← to Y
| |
ENT
ES
,
M P
AP AGE
.