Lowrance GlobalMap 4000M Operation Instructions Manual page 56

The Transfer My Data submenu asks if you want to save data to the
MMC or load data from the MMC into the GlobalMap 4000M's memory.
2. The Transfer My Data menu includes a message which tells you if an
MMC is present or not. If no MMC is present, you must first insert a
card into the GlobalMap 4000M in order to activate the Load or Save
commands.
To transfer data from the GlobalMap 4000M to the MMC: press
(for
ENT S
AVE
To transfer data from the MMC to the GlobalMap 4000M: press
→ to
|
L
OAD
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press ↓ to
shown in the following figures), press
Press ↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Then, press
|
S D ENT
AVE ATA
The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, repeatedly
press .
EXIT
From left to right, these figures show the menu sequence for naming and
saving a GPS Data File from the GlobalMap 4000M's memory to an MMC.
.)
.
ENT
S D
AVE
.
| . If you wish to rename the file (as
ENT
ATA
ENT
50
to activate the selection box.
|↓ to
ENT