Edit Route Waypoints; Navigate A Route - Lowrance GlobalMap 3600C iGPS Operation Instructions Manual

3. Press ↑ or ↓ to change the first character, then press → to move the
cursor to the next character and repeat until the name is correct, then
press .
ENT
| |
EXIT EXIT EXIT

Edit Route Waypoints

You can edit the route by adding and removing waypoints.
1. From the
press |
MENU MENU
2. Press ↓ to route name|
select a waypoint, then press
3. Use ↓ and ↑ to select a command from the Edit Route Waypoints
menu and press
route by clicking on a map location with the cursor. Add Waypoint calls
up the Waypoint List so you can insert a waypoint from the list. Re-
move Waypoint will delete the waypoint from the route. View Waypoint
will show you where the selected waypoint is on the map.
NOTE:
When adding waypoints to a route, the inserted waypoints will ap-
pear in the route in front of the waypoint you have selected. To in-
sert waypoints at the end of the route, make sure to select "(End of
route)" before adding them.

Navigate a Route

1. From the
press |
MENU MENU
Return to
| .
EXIT
N P
AVIGATION AGE
|↓ to
R
OUTE
ENT
Edit Route Waypoints menu.
. Add From Map lets you insert a waypoint in the
ENT
N P
AVIGATION AGE
|↓ to
R
OUTE
the previous
, press
MENU
|
P ENT
LANNING
|↓ to
R W
OUTE
.
ENT
, press
MENU
|
P ENT
LANNING
61
page
| or from the
ENT
.
. Use ↓ and ↑ to
L
AYPOINTS IST
| or from the
ENT
.
by pressing
M P
AP AGE
,
M P
AP AGE