Lowrance GlobalMap 3600C iGPS Operation Instructions Manual page 53

To Save a Trail
1. Press
MENU
Sequence for saving a trail and beginning a new one. My Trails com-
mand (left). The Trails Menu (center). The arrow to the right of Trail 1
indicates the trail is active, and the check to the left indicates the trail
is visible on the map display. The figure shows (right) the Edit Trail
2. Press ↓ to the Active Trail Name|
3. Press ↓ to
A
4. To return to the previous page, press
leave the Edit Trail menu, you will notice that a new trail starts with a
new sequential number. In the example figure below, the new trail is
number 15, showing zero points. Note that Trail 14 is inactive, but it is
still visible on the map.
New trail named Trail 2 is created when Trail 1 is set to inactive. New
travel will be recorded in this trail, which is active and visible. Trails
do not have to be visible in order to be active.
| |↓ to
MENU M
Visible
symbol
menu, with the Active command selected.
| . This unchecks the Active option.
ENT
CTIVE
| .
T ENT
Y RAILS
Active
symbol
.
ENT
EXIT
47
| | |
EXIT EXIT EXIT
. As you