Create Waypoint On Map; Create Waypoint By Entering A Position; Navigate To A Waypoint - Lowrance GlobalMap 3600C iGPS Operation Instructions Manual

Symbol is described in Sec. 4.) After you have changed a waypoint
symbol, the unit will remember the one you chose and use it the
next time you "quick save" a waypoint. To revert back to the default
symbol, edit a waypoint and choose the original symbol, or use the
Reset Options command (described in Sec. 5).

Create Waypoint on Map

1. Use the arrow keys to move the cursor to the place where you want
to make a waypoint.
2. Press |
WPT
name with a sequential number, such as "waypoint 001." The waypoint
symbol and number appear on the map.

Create Waypoint by Entering a Position

1. Press |→ to
WPT
2. Press ↓ to
E
3. Press → to
change the first character, then press → to the next character and re-
peat until the latitude is correct. Press
4. Press ↓ to
L
change the first character, then press → to the next character and re-
peat until the longitude is correct. Press
to the previous page display. The waypoint is saved and automatically
given a name with a sequential number, such as "waypoint 001." The
waypoint symbol and number appear on the map and in the waypoint
list.

Navigate to a Waypoint

You can select any waypoint visible on the Map Page with the cursor,
then use the Navigate to Cursor command (we'll describe how later in
this section.) However, you can avoid scrolling the map to pick your
waypoint if you use the Find Waypoint commands:
1. Press |→ to
WPT
↓ to
|
N
EAREST
waypoint list), press
2. If your waypoint list is a long one, you can spell out the waypoint
name in the
F
IND
first character, then press → to move the cursor to the next character
and repeat until the name is correct, then press
below.)
. The waypoint is saved and automatically given a
WPT
S
UBCATEGORY
P
NTERED OSITION
|
L ENT
ATITUDE
|
ENT
ONGITUDE
|
S ENT
AVED
; or, to look by name (and scroll through the entire
ENT
. For this example, look by name.
ENT
box to search for it. (Press ↑ or ↓ to change the
B N
Y AME
column|↓ to
| |→ to
ENT C
REATE
. Enter the latitude by pressing ↑ or ↓ to
ENT
. Enter the longitude by pressing ↑ or ↓ to
ENT
. To look up the nearest waypoint, press
42
| .
N ENT
EW
| .
ENT
.
, then |
EXIT
to jump to the list
ENT
to return
EXIT