Table of Contents
Advertisement
WARNING:
If you uncheck the Update Trail option, automatic trail creation and
recording will be turned off, and you must turn it back on to record
trails. The default setting is on.
Press ↓ or ↑ to
check it (turn on) and uncheck it (turn off.)
Update Trail Criteria (Auto, Time, Distance)
The options are automatic, time, or distance. When it's in the default
automatic mode, the unit doesn't update the plot trail while you're
traveling in a straight line. Once you deviate from a straight line, the
unit "drops" a plot point (trail waypoint) onto the trail. This conserves
plot trail points. If a plot trail uses all of the available points allotted to
it, the beginning points are taken away and placed at the end of the trail.
Press ↓ to
U
PDATE
Trail Update Rate (Time, Distance)
You can update a trail by time, with a range from 1 second to 9999 sec-
onds; the default is 3 seconds. You can update by distance, with a range
from 0.01 mile/nm/km to 9.99 mile/nm/km; the default is 0.10 mile.
With Update Criteria selected, press ↓ to either the rate or distance
data entry boxes and press
ter, then press → to the next character and repeat until the entry is
correct. Press
offered by www.Busse-Yachtshop.de
. With the option highlighted, press
U
T
PDATE
RAILS
Trail Options menu.
|
C
ENT
RITERIA
ENT
|
to return to the Trail Options Menu.
EXIT
EXIT
email: info@busse-yachtshop.de Tel: +49 (0)4347 908234
|press ↓ or ↑ to select criteria type|
. Press ↑ or ↓ to change the first charac-
80
to
ENT
.
ENT
Advertisement
Table of Contents
