Mantel And Wall Projections - Vermont Castings BE36 Installation Manual

D. Mantel and Wall Projections
The combustible mantel may have a maximum depth of
12 in. (305 mm) positioned 12 in. (305mm) above the fire-
place opening. Combustible trim pieces that project no
more than 1 1/2 in. (38 mm) from the face of the fireplace
can be placed no closer than 6 in. (152 mm) from the top
of the decorative front. Combustible trim must not cover:
• the metal surfaces of the fireplace
• where the non-combustible board is placed over the
metal surfaces
• the space between the metal face of the fireplace and
framing members
VCG Royalton Series • BE36/42 • 4044-197 Installation Manual • Rev A • 02/18/15
Combustible Wall
2 x 4 stud wall
Standoffs
Seal joint with
non-combustible
sealant
1 1/2 in./38 mm
maximum
Non-combustible
Decorative Facing
such as:
Steel, iron, brick,
tile, concrete, slate,
glass, plasters.
Figure 7.10 Mantel Specifications
WARNING! Risk of Fire!
Vermont Castings Group is not responsible for
discoloration, cracking or other material failures of
finishing materials due to heat exposure or smoke.
• Choose finishing materials carefully.
Grid represents 1" scale
Combustible
Decorative Facing
12 in./305 mm
12 in./305 mm
minimum
6 in./152 mm
minimum
Measured from top of fireplace opening
6 ft (1829 mm)
minimum
base of fireplace
to ceiling
31