Cup Grid - WMF 5500 Series User Manual

3.9

Cup grid

raising
™ Pick up the cup grid by inserting one finger in the
recess and pull up until the hinges on the struts lock
in place
Lowering
™ Lift the front of the cup grid slightly until the
hinges disengage
™ Lower the cup grid
Clearance heights for raised cup grid
Single spout: 82 mm
Double spout: 77 mm
3.10 SteamJet cup warmer
Burn hazard / scalding hazard
• Hot steam is produced by the SteamJet cup
warmer. The cups and adjacent surfaces also
get very hot.
> Use heat-resistant cups.
> Always place a cup upside-down over the
cup warmer before dispensing steam.
> Do not touch the adjacent surfaces
immediately after dispensing.
> Do not touch the spouts immediately after
dispensing.
> Never use the SteamJet function without the
drip grid in place or without the cup warmer
insert.
User Manual WMF espresso
Operation | Cup grid
Lift up the cup grid
Lower the cup grid
CaUtion
Follow the Safety chapter
w starting on page 6
Clean drip tray daily
Care chapter
w starting on page 47
27