Related Manuals for Milwaukee M12 CC
Summary of Contents for Milwaukee M12 CC
- Page 1 OPERATOR'S MANUAL M12™ CORDLESS 300 mm² XLPE CABLE CUTTER To reduce The risk of injury, user musT read and undersTand operaTor's manual.
-
Page 3: Work Area Safety
general poWer Tool safeTy Warnings Warning read all safeTy Warnings and all insTrucTions. Failure to follow the warnings and instructions may result in electric shock, fire and/or save all warnings and instructions for future reference. serious injury. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. attached to a rotating part of the power tool may Work area safeTy result in personal injury. • K eep work area clean and well lit. -
Page 4: Specific Safety Rules
Never cut gas or water lines. • M aintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement. • WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. -
Page 5: Operation
Warning To reduce the risk of injury: dull, rounded, or damaged. Always replace blades as a set. •Do not cut short pieces of material that put fingers near blades. Blade is sharp. Use only MILWAUKEE blade Part No. • W ear safety goggles or glasses with side shields. Material may crack or shatter. Warning Always remove battery •Blade is sharp. Keep hands away pack before changing or removing from cutting edges and moving accessories. Only use accessories specifi-... -
Page 6: Maintenance Warning
LEDs will blink. Follow these steps in to a MILWAUKEE service facility for repairs. order until the jam is released. 1. Move the speed control switch to "1" and attempt... - Page 8 Techtronic Industries (Australia) Pty. Ltd. Doncaster, Victoria, Australia, 3108 Milwaukee Electric Tool Corporation (New Zealand) Techtronic Industries (New Zealand) Pty. Ltd. Mt Wellington, Auckland, New Zealand, 1060 Professionally made in China for Milwaukee Electric Tool Corporation 58-14-2472d1 Printed in China 961075183-01(A)