Table of Contents
Advertisement
• W hen battery pack is not in use, keep it away
from other metal objects like paper clips,
coins, keys, nails, screws, or other small metal
objects that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
• U nder abusive conditions, liquid may be eject-
ed from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
service
• H ave your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
specific safeTy rules
• T o reduce the risk of injury, wear safety
goggles or glasses with side shields. Material
may crack or shatter.
• B lade is sharp. Keep hands away from all cut-
ting edges and moving parts. Laceration and
amputation can occur.
• To reduce the risk of injury, always move blade
to the fully closed position before storing and
any time the tool is not in use.
• T o reduce the risk of explosion, electric shock
and property damage, do not cut live electri-
cal lines. Turn off power before making a cut.
Never cut gas or water lines.
• M aintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
• WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to filter out microscopic particles.
Cat. No.
Volts
M12 CC
12 DC
specificaTions
Material
Copper Cable
Aluminum Cable
Communications Cable
symbology
WARNING Risk of electric shock
WARNING Keep hands away
from all cutting edges and moving
parts. Blade is sharp. Laceration
and amputation can occur.
Always wear eye protection
Read Operator's Manual
Direct Current
Underwriters Laboratories, Inc.
United States and Canada
funcTional descripTion
9
8
7
6
5
1. Fuel gauge
2. 3/16" Hex wrench
3. Trigger
4. Trigger lock
5. Blade release lever
6. Blade release bolt
7. Lower blade
Material Maximum Capacity
300 mm² XLPE
300 mm² XLPE
29.4 mm (1.16") O.D.
4
10
4
3
8. Upper blade bolt
9. Upper blade
10. Speed control switch
1
2
Advertisement
Table of Contents
