Pro-Form StrideClimber 490 User Manual page 11

11. Lift the Left and Right Link Arms (25, 39) and
set the Rollers (27) on the Track (2). Make sure
that the Rollers are centered on the Track. If
necessary, move the Track to the right or to the
left until the Rollers are centered on the Track.
See step 2. With the help of another person,
tighten the M8 x 50mm Button Screws (65) and
the M8 x 16mm Button Screws (53).
12. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be
left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the
elliptical exerciser.
11
25
27
11
39
27
2