Handset / Handsfree / Headset; Programmable Keys - elmeg IP290 User Manual

[ e l m e g I P 2 9 0 A

Handset / Handsfree / Headset

The elmeg IP290 supports calls being made while using the handset
or the handsfree capability. During a call, it is possible to easily switch
between both modes by pressing the function key
If a headset is connected and the audio output is set to headset
("RJ Conn" or "Chinch"), the elmeg IP290 will treat the headset as the output
device for calls. For using elmeg I P 2 9 0 in a call center environment, the
connected headset will be the default case for dealing with the phone.
The key is therefore used to accept incoming calls.
Key mapping:
Switch to handsfree mode and back.
Accept incoming calls while headset mode
is on.
Returns to the idle state.

Programmable Keys

The five programmable keys on elmeg IP290 on the right beside
the number block are the programmable function keys, which have the
following options:
Line
§
Destination
§
Intercom
§
M
D M I N I S T R A T O R
V 3 . 0 0 ]
A N U A L
.
elmeg • 31
3