Enviro DV36 Owner's Manual

SHERWOOD INDUSTRIES IS AN ENVIRONMENTALLY RESPONSIBLE COMPANY. THIS MANUAL IS PRINTED ON RECYCLED PAPER.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
OWNER'S MANUAL
WARNING
If the information in this manual
is not followed exactly, a fire or
explosion may result causing
property damage, personal injury or
loss of life. Installation and service
must be performed by a qualified
installer, service agency or the gas
supplier.
WHAT TO DO IF YOU SMELL GAS
• Open windows/extinguish any open flame.
• Do not try to light any appliance.
• Do not touch any electrical switch or use any phone in
your building.
• Immediately call your gas supplier from a neighbour's
phone. Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire
department.
Do not store or use gasoline or other flammable vapours and liquids in the
Massachusetts installations (Warning): This product must be installed by a licensed plumber or gas fitter when installed within the
Commonwealth of Massachusetts. Other Massachusetts code requirements: Flexible connector must not be longer than 36in, shut-off
valve must be a "T" handle gas cock; only direct vent sealed combustion products are approved for bedrooms/bathrooms; fireplace
dampers must be removed or welded in the open position prior to the installation of a fireplace insert or gas log.
DV36
D I R E C T V E N T F I R E P L A C E
B Y : S H E R W O O D I N D U S T R I E S L T D
FOR YOUR SAFETY
vicinity of this or any other appliance.
This appliance may be installed in an
after-market permanently located,
manufactured (mobile) home, where
not prohibited by local codes.
This appliance is only for use with
the type of gas indicated on the
rating plate. This appliance is not
convertible for use with other gases,
unless a certified kit is used.
50-927