Enviro The Cottage DV42DX Installation Instructions

Sherwood's Home Collection
INSTALLATION INSTRUCTIONS:
IMPORTANT: Please be careful when removing the
face from the packaging as you may damage it.
1. The distance between the fireplace and the face
can be adjusted to compensate for added material
around the fireplace. Adjust depth if required; refer
to "ADJUSTING DEPTH OF FACE INSTRUCTIONS".
2. Lift the face upright in front of the fireplace with the
two clips pointing towards the fireplace. Slide the
clips into the slots (see Figure 1). The clips should
make a 'click' sound when they are in place.
3. The face should be cleaned before the fireplace is
turned on for the first time, refer to "CLEANING THE
FACE".

REMOVAL INSTRUCTIONS:

WARNING: To avoid personal injury do not handle face when hot.
1. Press on the clip from the inside, as shown in the Figure 2. When both clips have been unlocked then pull the
face away from the fireplace.
2. Place the face where it will not be damaged.
Slot on
DV42DX
Clip on
Cottage
Figure 1: The Cottage clip sliding into DV42DX slot.
The Cottage
DV42DX
Figure 2: Push on clip to remove Cottage.