Page 1
The patina finish on your face is a “living” color and will age and antique over time. Enjoy the timeless, rich luster of your beautiful new face. Page 1 of 11 Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 Packing List: • Face • Glass Frame Cover • Aromatherapy Bracket •...
Installation Details 41” Page 2 of 11 Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 35-3/4" NOTE: This face has an adjustable bracket that allows for different facing depths to be tucked under the face. 17601408 - 3/30/12 Carbon Patina 95800251 SIDE OF FIREPLACE 0”...
Page 3
NOTE: This deflector must be replaced to its original position if a different face or grill is used. Page 3 of 11 Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 Remove the center deflector (use needle- nose pliers if necessary). WARNING: The deflector must be replaced in its original position if a different face or grill is used.
1 Install the fireplace brackets onto the fireplace following the directions below. Bracket Identification Page 4 of 11 Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 Repeat these steps for the opposite side. Upper Left Lower Left 17601408 - 3/30/12...
Page 5
2 Install the glass frame cover following the directions below. Place the cover over the top of the door frame. Page 5 of 11 Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 Push these pins inwards to lock the cover in place. 17601408 - 3/30/12 Carbon Patina 95800251...
Page 6
3 Attach the face baffle and face brackets following the directions below. Attach the upper face brackets to the face with the included nuts. Page 6 of 11 Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 Face Baffle 17601408 - 3/30/12 Carbon Patina 95800251 Loosen these upper nuts and slide the face baffle over the studs.
Page 7
Use denatured alcohol and a soft cloth to clean plated surfaces. Marks left on the surface may damage the face. Page 7 of 11 Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 17601408 - 3/30/12 Carbon Patina 95800251 Slide the face into place. The tabs on the upper...
Page 10
Page 10 of 11 Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 Slide the extension assembly into place (it is installed from behind the face). Secure the extension assembly with two 8-32 nuts (included with the aromatherapy kit).
Page 11
Page 11 of 11 Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 Use a cottom swab to apply a thin layer of anti-seize to the bearings and sliding surfaces. NOTE: the anti-seize stains very easily - take care to prevent it from contacting your skin, clothing, or other surfaces.
Need help?
Do you have a question about the BLACK 99300496 and is the answer not in the manual?
Questions and answers