Using The Accessories - AEG BP730402K User Manual

16 www.aeg.com
When the set time ends, an acoustic
signal sounds for two minutes.
flashes. The appliance deactivates.

9. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
9.1 Core temperature sensor
There are two temperatures to be set:
the oven temperature and the core
temperature.
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
CAUTION!
Only use the core
temperature sensor supplied
or the correct replacement
parts.
The core temperature sensor
must stay in the meat and in
the socket during the
cooking.
1. Activate the appliance.
2. Put the point of the core temperature
sensor (with
the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows
default set core temperature. The
on the handle) into
flashing and the
6. Touch a sensor field or open the
door to stop the acoustic signal.
temperature is 60 °C for the first
operation, and the last set value for each
subsequent operation.
When you put the core
temperature sensor into the
socket, you cancel the
settings for the clock
functions.
4. Touch or
temperature.
5. Touch or the settings save
automatically after 5 seconds.
You can set the core
temperature only when
flashes. If
display but does not
flash before you set the
core temperature, touch
and or
a new value.
6. Set the oven function and the oven
temperature.
The display shows the current core
temperature and the heat up symbol
While the appliance calculates the
approximate duration time, the display
shows the count up time. After the first
calculation the display shows the
approximate duration of the cooking
time.
The appliance continues to calculate the
duration during the cooking. The display
updates at intervals with the new
duration value.
to set the core
is in the
to set
.