Snmp Agent; Tr-069 Client - iBall Baton iB-WRA150N User Manual

Log - Check the Disable radio button to disable the system log function. The default setting is
enabled.
Log Level - Select the log level, then all the events above or equal to the selected level will be
logged.
Display Level - All logged events above or equal to the selected level will be displayed.
Mode - Select Local, Remote or Both. If the selected mode is Remote or Both, events will be
sent to the specified IP address and UDP port of the remote syslog server. If the selected
mode is Local or Both, events will be recorded in the local memory.

4.10.3 SNMP Agent

Choose "System Tools/Maintenance→ SNMP Agent" menu, and you will go to the SNMP
(Simple Network Management Protocol) page as shown in Figure 4-89. SNMP allows a
management application to retrieve statistics and status from the SNMP agent in this device.
Select the desired values and click Save/Apply to configure the SNMP options.

4.10.4 TR-069 Client

Choose "System Tools/Maintenance→TR-069 Client", you can see the TR-069 client -
Configuration screen as shown below.
TR-069（WAN Management Protocol）allows a Auto-Configuration Server (ACS) to perform
auto-configuration, provision, collection, and diagnostics to this device.
iB-WRA150N 150M Wireless-N ADSL2+ Router - User Guide
Figure 4-88
Figure 4-89
73