iBall Baton iB-WRA150N User Manual page 49

To filter wireless users by MAC Address, click Enable. The default setting is Disable.
MAC Address: The wireless station's MAC address that you want to filter.
Status: The status of this entry either Enabled or Disabled.
Description: A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New... button. The "Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in Figure 4-36 .
Figure 4-36 Add or Modify Wireless MAC Address Filtering entry
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX:XX:XX:XX:XX:XX
00:0A:EB:00:07:8A.
2. Enter a simple description of the wireless station in the Description field. For example:
Wireless station A.
3. Status - Select Enabled or Disabled for this entry on the Status pull-down list.
iB-WRA150N 150M Wireless-N ADSL2+ Router - User Guide
Figure 4-35
(X is
44
any hexadecimal digit). For example: