Dmz Host - iBall Baton iB-WRA150N User Manual

2. Select the application from the drop-down list. If the list does not have the application that
you want, select the Custom application radio button, and type the name of the custom
application in the text box.
3. Enter the Trigger Port Start, Trigger Port End, Open Port Start and Open Port End in the table,
and then select the Trigger protocol and Open protocol, TCP, UDP or All.
4. Click Save/Apply to enable the settings and then you will see you settings as shown in Figure
4-43.
Note:
If you select the application from the drop-down list, the External Port Start, External Port End,
Internal Port Start, Internal Port End and the Protocol will be added in the table automatically.

4.7.1.3 DMZ Host

Choose "Advanced Setup→NAT→DMZ Host", you can set up DMZ Host on the screen (shown
in Figure 4-45).
The DMZ host feature can make a local host be exposed to the Internet for a special-purpose
service, such as online gaming or video conferencing.
To add a new DMZ Host:
You can enter the computer's IP address and then click Save/Apply to activate the DMZ host you
set on this page.
Note:
DMZ host forwards all the ports at the same time. Any PC whose port is being forwarded must
have its DHCP client function disabled and should have a new static IP Address assigned to it
because its IP Address may change while using the DHCP function.
iB-WRA150N 150M Wireless-N ADSL2+ Router - User Guide
Figure 4-44
Figure 4-45
51