Messages And Actions - Fujitsu M3099EX Reference Manual

Messages and Actions

Device and Operator Actions for Temporary Errors
If a temporary error is detected in the scanner, (Check ) lamp at the operator panel blinks.
PAPER JAM
HOPPER EMPTY
COVER OPEN
MISS PICK
ROLLER UNIT NOT SET
HOPPER OVERLOAD
PRINT HEAD NOT SET
PRINT HEAD ALARM
5-12
Open the upper transport unit and remove the document on the
*
transport path. Close the unit. Return the jammed or double-feed
document to the hopper and read it again.
Press the stop button or issue the start command. Load
*
documents on the hopper and start reading them.
Close the upper transport unit or the endorser cover. Or tighten
the thumb screw to lock the back-side lamp unit if it is loose.
Open the upper transport unit and remove the document on the
*
transport path. Close the unit. Return the jammed document on
the hopper and read it again.
*
Open the upper transport unit and correct the roller unit setting.
Close the upper transport unit. See "Roller ASY Replacement".
*
Reduce document stack in the hopper.
Stop
Press to reset the error and set the print head.
Stop
Press to reset the error and set the print head again.
If this error recurs, change the print head.
Stop
*: Press to reset these errors.
Operator panel