Fujitsu M3099EX Reference Manual page 23

Clean the clear portion of the
4
lamp with a dry cloth.
CAUTION
• Do not remove the tape from the heater.
• Do not change the heater position.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
WARNING
Wait at least 3 minutes after turning off the power before cleaning.
ACHTUNG
Warten Sie nach dem Reinigen mindestens 3 Minuten bevor Sie den
Scanner wieder anschalten.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Align the two metal socket covers
5
and snap them on to the ends.
CAUTION
When you re-clamp the right bracket, do not
pinch the heater cable.
(yellow/black 4 cables)
6
Close the upper transport unit.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2-9