Transport Paths And Glass Surface - Fujitsu M3099EX Reference Manual

Transport Paths
and Glass Surface
Cleaning the Transport Paths
1
Open the upper transport unit.
Wipe the transport paths with a
2
dry cloth or soaked in isopropyl
alcohol or cleaner F1.
Note
Use a vacuum cleaner to remove paper dust
from the transport paths.
Cleaning the Glass Surface
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Wipe the glass clean with a dry cloth
3
(or moistened with isopropyl alcohol
or cleaner F1 as necessary).
Align the sheet guide assembly in
4
the guide rails and push it back
into place.
5
Close the upper transport unit.
WARNING
Wait at least 3 minutes after turning off the power before cleaning.
ACHTUNG
Warten Sie nach dem Reinigen mindestens 3 Minuten bevor Sie den
Scanner wieder anschalten.
Sheet guide assembly
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1
Open the upper transport unit.
Pull down on the sheet guide
2
assembly tabs to remove it.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2-5