Acorp 6A815EP User Manual page 50

Reset Configuration Data
:Disabled(default)
:Enabled--- to reset "Extended System Configuration Data(ESCD) when you
exit setup if you have installed a new add-on card and the system reconfiguration
has caused such a serious conflict that the operating system can not boot up.
Resources Controlled By
:Manual
The table will show the below items: "Reset Configuration Data, IRQ-3
assigned to." The user can adjust the shown items as required.
:Auto(ESCD) (default)
The table will not show the above items, and the system will automatically assign
the above setup.
PCI/VGA Palette Snoop
:Disabled (default)
:Enabled
INT Pin 1 Assignment
:Auto(default)
INT Pin 2 Assignment
:Auto(default)
INT Pin 3 Assignment
:Auto(default)
INT Pin 4 Assignment
:Auto(default)
INTEL 815EP 45