Acorp 6A815EP User Manual page 37

Third Boot Device
This category determines which drive the system searches first. System will
search in turn for floppy disk drive; second is hard disk drive, and finally Floppy
drive. Default value is "LS120". Options are as below:
FLOPPY; LS120; HDD-0; SCSI; CDROM; HDD-1; HDD-2; HDD-3;
ZIP100; LAN; Disabled;
Boot Other Device
:Enabled (default)
:Disabled
Swap Floppy Drive
Enabled: floppy A&B will be swapped.
Disabled(default): floppy A&B will not be swapped.
Boot Up Floppy Seek
BIOS will determine if the floppy disk drive is 40 or 80 tracks. 360k type is 40
tracks while 720K/ 1.2M and 1.44M are all 80 tracks. Default value is Enabled.
Boot Up Numlock Status
:On (default)
:Off
Gate A20 Option
:Normal
:Fast (default)
Typematic Rate Setting
This determines the typematic rate.
Enabled: enable typematic rate and typematic delay programming.
Disabled(default) : disable typematic rate and typematic delay programming. The
system BIOS will use default value of this 2 items and the default is controlled by
keyboard.
Typematic Rate(Chars/Sec)
INTEL 815EP 32