Table of Contents
Advertisement
Fixture Info
Neeva includes some informational screens with important troubleshooting information. From
the main display press the Enter function then the Up function until you see the following display.
Info
From here use the Enter function and then the Up or Down function to display the
LedTemp
(Software Version),
to the main display.
Set
Neeva includes a set of Setup screens that program important operational aspects of the
fixture. From the main display press the Enter function then the Up function until you see the
following display.
Set
Set
From the
screen you can first access the
Fact Setings
from the
their factory defaults of
this screen the Neeva will respond with
values. Press the Menu function to move back up to the previous level.
Fact
Defaults
The LcdLite can be set to function in two ways. The factory default is for the LCD backlight to
time-out and turn off after a period of non-use. Setting
stay on continuously and
LcdLite
Auto
Press the Enter function and the Up/Down arrow will move to the second like where the Up or
Down function will rotate through the options. As always the Menu function returns you to the
upper level menu.
Like all LED based lighting fixtures the Neeva mixes colors based on the propotional use of Red,
Green and Blue LEDs. Neeva adds to this with an extra channel of White LEDs to expand the
range of possible colors. The Neeva is set at the factory to balance the RGB mix of the LEDs to
FanRPM
, and
of the fixture. Use the Menu function to move back
function in that this function resets the values programmed in
LcdLite=Auto
Led Cal
and
Busy
Off
will turn off the backlight.
Fact Defaults
screen. This function is different
all colors to full. If you press Enter while on
Done
and then
when it has reset the defaults
LcdLite
On
to
SftVer
Set
back to
will force the backlight to
Advertisement
Table of Contents
