Subscribe to Our Youtube Channel
Related Manuals for Strong Neeva
Summary of Contents for Strong Neeva
- Page 1 Neeva – LED Profile User Manual Strong Entertainment Lighting 4350 McKinley Street Omaha, NE 68118 April, 2011 Rev 1...
-
Page 2: Table Of Contents
Table of Contents Overview ..............................3 User Interface Conventions ....................... 4 DMX Channel Information ......................5 Setting DMX Address ........................5 Recording Scenes ..........................6 Programming Steps ............................. 6 Fixture Info .............................. 7 Set ................................7 Adjustments ............................9 Focusing the beam ............................9 Shaping the beam ............................ -
Page 3: Overview
Overview Neeva Exploded View Drawing Neeva is a LED profile spotlight. Rather than using an incandescent lamp, a dimmer and a color filter to create lighting levels and moods Neeva is directly DMX controllable to create a wide range of lighting levels and moods. -
Page 4: User Interface Conventions
User Interface Conventions The Neeva features a robust user interface that consists of a two line LCD display and four buttons. The left button below the display in the “Menu” function, the right button is the “Enter” function and the two buttons on the side are the “Up” and “Down” functions. For the purpose of this manual any time you see these four functions listed in bold type this refers to pressing that function button. -
Page 5: Dmx Channel Information
DMX Channel Information The home display of the user interface is the DMX status screen. If this screen is not the current display press the Menu function until this display appears: Dmx: On Addr:XXX The word after Dmx: will be either On or Off indicating that the fixture is either receiving DMX from a control source or not. -
Page 6: Recording Scenes
Up and Down functions to access other fixture functions. Recording Scenes The Auto menu is used to enable and record scenes for standalone operation of the Neeva. Auto To start the menu use the Enter function from the Auto display. -
Page 7: Fixture Info
(Software Version), LedTemp, and FanRPM of the fixture. Use the Menu function to move back to the main display. Neeva includes a set of Setup screens that program important operational aspects of the fixture. From the main display press the Enter function then the Up function until you see the following display. - Page 8 Set back to their factory defaults of LcdLite=Auto and Led Cal all colors to full. If you press Enter while on this screen the Neeva will respond with Busy and then Done when it has reset the defaults values. Press the Menu function to move back up to the previous level.
-
Page 9: Adjustments
Slide the lens tube forward or backward to achieve a sharp focus. Note: Due to the unique nature of the Neeva LED Profile a soft focus is not desirable. Best results are achieved by using your choice of diffusion materials when you want to achieve a soft focus effect. -
Page 10: Adjusting Fixture Angle
Note: In neither position will the Neeva be able to be turned through the yoke with DMX cables attached. To rotate yoke past the rear panel it is necessary to remove the DMX cables. Adjusting fixture angle Loosen the yoke locking knobs but do not remove them. Tilt the fixture to the desired angle and then tighten the yoke locking knobs to set in that position.
Need help?
Do you have a question about the Neeva and is the answer not in the manual?
Questions and answers