Remove Pfc Induction; Remove 4-Way Valve Assy; Remove Valve Support Sub-Assy And Expansion Valve Assy - Gree GWHD14NK3BO Service Manual

Steps

13. Remove PFC induction

Remove the screw connecting the PFC induction
and middle isolation sheet, and then remove the
PFC induction.

14. Remove 4-way valve assy

Unsolder the welding joint connecting the 4-way valve
assy with compressor suction and discharge port, the
valve with the outlet pipe of condenser. Then lift the
4-way valve assy to remove it.
(NOTE: Discharge the refrigerant completely before
unsoldering.)

15. Remove valve support sub-assy and expansion valve assy

Remove the screw connecting the valve support and
the chassis, and then remove the valve support assy.
Unsolder the welding joint connecting the electronic
expansion valve assy with the cut-off valve and the
condenser connection pipe, and then remove the e
xpansion valve assy.
Procedure
Removal Procedure
PFC induction
4-way valve
assy
expansion
valve assy
valve support assy
89