Installation Location And Matters Needing Attention; Electric Wiring - Gree GWHD14NK3BO Service Manual

7.5.1 Installation Location and Matters Needing Attention

regulations. The installation quality directly affects the normal use, so the user
should not carry out the installation personally, instead, the installation and
a. How to select the installation location for the indoor unit
1) Where there is no direct sunlight.
7) Where there is no corrosive gas, heavy dust, salt mist, smog or moisture.
b. How to select the installation location for the outdoor unit
refrigerant pipe.
the room.
enough air.
and other severely polluted air.
the outdoor unit. Under the heating mode, the condensate water would drip
temperature is lower than 0
unit should not affect the heat radiation of the unit.
CAUTION !
personnel at the GREE appointed service center.
sulfur hot spring ; where there are devices with high frequency (like wireless devices, electric welding devices, or medical
equipments); special circumstances.
c.

Electric Wiring

and also this manual.
one.
The installation of the unit must comply with the national and local safety
32
where is full of oil;
. Besides, the installation of the outdoor
alkaline soil off the sea;
Installation Manual
where there is sulfur gas like
33