Accton Technology CheetahSwitch Workgroup-3627 Installation Manual page 18

About the CheetahSwitch Workgroup-3627
Optional 1000BASE-LX Module (EM4501C-LX-SC)
Figure 1-4. Single-Port 1000BASE-LX Gigabit Module
Using single-mode fiber optic cable, the 1000BASE-LX port can be connected to a
remote site up to 5 km (16404 ft) away. The 1000BASE-LX Gigabit module operates
at 1 Gbps, with support for full-duplex mode and flow control.
Optional 1000BASE-T Module (EM4501C-T)
Figure 1-5. Single-Port 1000BASE-T Gigabit Module
Using Category 5 or 5e twisted-pair cable you can connect to another device up to
100 m (328 ft) away. The 1000BASE-T module operates at 1 Gbps, full duplex, and
supports auto-negotiation of flow control. Note that you should first test the cable
installation for IEEE 802.3ab compliance. See "1000BASE-T Cable Requirements"
on page B-3.
Optional 100BASE-FX Module (EM3526JA-1FX-SC-S)
Figure 1-6. Single-Port 100BASE-FX Single-Mode Module
Using single-mode fiber optic cable, the 100BASE-FX port can be connected to a
remote site up to 20 km (12.43 miles) away. The 100BASE-FX module operates at
100 Mbps, with support for full-duplex mode and flow control.
1-6
1000BASE LX-SC Expansion Module
TX
EM4501C-LX-SC
1000BASE-T Expansion Module
EM4501C-T
100BASE-FX Single-Mode Module
TX
EM3526JA-1FX-SC-S
RX
RX